(Part No. VM10416)
(Part No. VM16429)
Half Round Bastard File (250mm) fitted with ergonomically designed handle for a comfortable improved grip.
(Part No. VM10311)
Retractable pattern metal bodied knife complete with two blades.
(Part No. VM68505)
Pointing Trowel (150mm) Carbon steel blade hardened, tempered with lacquered finish. Soft grip handle for user comfort.
(Part No. VM69121)
Spear & Jackson 22" Hardpoint Saw
A general purpose saw for use across the grain. Fast cut - rapid, clean cutting action. Ideal for timber, hardwood, chipboard and MDF.
(Part No. 10097C)
Tape Measure 5m/16ft
Plastic case with soft grip, belt clip and locking button.
(Part No. VM69054)
Self grip plier (140mm)
Serrated gripping surfaces and adjustable opening, with quick-release lever.
(Part No. VM35367)
Self grip plier with 'flip-up' release lever, adjusting screw, linished jaws and all plated with bright nickel finish
(Part No. VM67823)
Wire scratch brush with plastic handle incorporating a hang hole. Fitted with a stainless steel scraper.
(Part No. VM17177)
(Part No. VM41328)
Dust masks for protection against non toxic dusts and powders. Suitable only to reduce discomfort caused by exposure to coarse non-toxic particles.
(Part No. VM00110)
Heavy duty 12 litre stainless steel bucket Constructed from rust-free and non-corrosive stainless steel, this bucket is safe for food use
(Part No. 11868)
Stainless Steel Cabinet Key
7mm Square
(Part No. VM0286)
Fox Wedge, sometimes referred to as Bursting wedges used for separating pipe flanges
(Part No. VM10001A)
(Part No. VM10001)
Outside caliper (Firm-Joint) 900mm (35.5”)
(Part No. 10082A)
Draper Expert 580mm Tool Box and Tote Tray
Expert Quality, heavy-duty toolbox manufactured from impact resistant polypropylene
(Part No. VM27732)
Expert Quality, manufactured from heavy duty water repellent polyester with PVC backing
(Part No. ZZ041A)
9” Footprint Wrench
An essential tool for all Plumbers, Pipe Fitters and Engineers.
(Part No. 1000130)
(Part No. VM63733)
1” Cold Chisel with hand guard (Stanley)
Forged from chrome vanadium steel for increased strength and durability.
Blade holds its edge longer and therefore needs less sharpening.
(Part No. VM18332)
Cold Chisel with impact absorbing hand protection grip. 19 x 250mm
(Part No. VM63747)
Draper 19mm Octagonal Shank Cold Chisel with Hand Guard
(Part No. 1002560)
Heavy Duty Gas Torch
Suitable for a wide range of general plumbing or heating tasks
(Part No. 10064A)
Wrecking Bar 18" (450mm)
For dismantling timber work, case opening, etc. and removing nails.
(Part No. 10003)
High strength, solid forged, tapered point and angled foot crowbar
(Part No. 11245D)
Carbon steel hardened and tempered. The jaws and cutting edges are induction hardened. Heavy duty two-tone soft grip handles with slip guards
(Part No. ZZ645)
Ideal for Meter Inspectors when conducting meter readings
(Part No. ZZ223A)
Spear & Jackson Telescopic Ratchet Bypass Loppers 18 - 28"
(Part No. ZZ004)
Telescopic magnet with 5 Lbs lift capacity
(Part No. ZZ328)
