Static Assembly c/w Ball Valve

Information

Gunmetal Static Assembly c/w Ball Valve

The male instantaneous plug is fitted with a 80mm (3”) gauge range and 1/4” BSP ball valve.

The device is used to take static pressure readings at the hydrant standpipe outlet. It has the facility of a built-in ball valve to allow connection to other devices as well as providing a static pressure reading when closed.

The assembly can be supplied with either a Dry or Glycerine filled 80mm (3”) gauge with rubber boot.

Dry Gauge Ranges:

30mhd/3bar          (Part No. Z9035BVE)        

70mhd/7bar          (Part No. Z9034BV)

100mhd/10bar       (Part No. Z9034BVL)

140mhd/14bar       (Part No. Z9035BV14)

160mhd/16bar       (Part No. Z9035BVK)

200mhd/20bar       (Part No. Z9035BVC)

300mhd/30bar       (Part No. Z9035BVZ)

Glycerine Filled Gauge ranges:

30mhd/3bar          (Part No. Z9034BVE)

70mhd/7bar          (Part No. Z9034BVB)

100mhd/10bar       (Part No. Z9035BVL)

140mhd/14bar       (Part No. Z9035BVH)

160mhd/16bar       (Part No. Z9035BVA)                                                                                    

200mhd/20bar       (Part No. Z9035BVB)

The gunmetal static assembly is available in all pressure ranges listed above.