Boundary Box & Contractor Standpipes

3/4"Stainless Steel Samplers Standpipe Plastic (Acetal) boundary box base

The 3/4"Stainless Steel Samplers Standpipe is manufactured from 316 stainless steel with a plastic (Acetal) boundary box base and chrome plated sampling tap.

(Product Code ZZ909A)

B.Box 3/4" Plastic S.Pipe c/w Samplers Tap

(Part No. Z9096E)

B.Box 3/4" S.Pipe + DCV/Metered/HUBT/GM BASE

(Part No. ZZZ011)

B.Box Digital Flow & Pressure Standpipe 10 - 120 lpm c/w Digital Pressure Gauge

The 3/4" Boundary Box Digital Flow and Pressure Standpipe is designed to measure both the pressure and flow rate (LPM) at the boundary box. The standpipe is fitted with a plastic (Acetal) boundary box base to reduce the risk of cross threading the base into the meter box.

(Part No. VM10003B)

B.Box Digital Flow & Pressure Standpipe 10 - 120lpm

The 3/4" Boundary Box Digital Flow and Pressure Standpipe is designed to measure both the pressure and flow rate (LPM) at the boundary box. The standpipe is fitted with a plastic (Acetal) boundary box base to reduce the risk of cross threading the base into the meter box.

(Part No. VM10003A)

Boundary Box 3/4" Standpipes (See List)

The Galvanised Steel Boundary Box standpipes are designed to connect directly to the Meter Box.

Can be supplied in virtually any combination.

Contr's 3/4" S.Pipe c/w DCV, Kent Meter, LRT Base & HUBT

The 3/4” Metered Contractors standpipe is designed to connect directly to the Hydrant outlet.

The Standpipe is supplied with a Kent V100 cold water meter, Double Check Valve (DCV) and  3/4”  Hose Union Bib Tap.

(Part No. 11708C)

3/4" S/Steel Standpipe c/w Samplers Tap & LRT Base

The 3/4"Stainless Steel Samplers Standpipe is manufactured from 316 stainless steel with a gunmetal LRT base and chrome plated sampling tap.

(Product Code ZZ909)

Contractors Standpipe c/w DCV & HUBT LRT Base

The 3/4” galvanized steel Contractors standpipe is designed to connect directly to the Hydrant outlet.

The Standpipe is supplied with a 3/4”  Hose Union Bib Tap and Double Check Valve (DCV)       

(Part No. 11712)          

Contractor Standpipes (See List)

The Contractor’s LRT Base standpipes are designed to connect directly to the Hydrant Outlet.

Can be supplied in virtually any combination

B.Box 3/4" S.Pipe/P.Point/HUBT/PLASTIC BASE

The ¾” galvanized steel boundary box standpipe is designed to connect directly to the boundary box outlet.

In addition to being fitted with a plastic base the standpipe is also fitted with a non-slip sleeve to further reduce the risk of damaging the boundary box outlet through over-tightening.

(Part No. ZZZ20)

Boundary Box (Plastic) Standpipes (See List)

The Plastic Boundary Box standpipes are designed to connect directly to the Meter Box.

Can be supplied in virtually any combination.

B.Box 3/4" F&P S/Pipe c/w Isolation Valve & Perspex Tube

(Part No. VM10003)