Test Kits

High & Low Pressure & Flow Test Kit

(Part No. TK508)

Airlock Test Kit

This kit is designed to help alleviate problems with airlocks and poor pressure due to blockages in the inside stop valve.

(Part No. TK600)

Boundary Flow and Pressure Test Kit

Designed for ease of use for Inspectors and installation crews within the water utility industry. This kit enables low pressure and flow rates to be identified at the boundary box. Capable of measuring flow from 20 – 100 lpm.  Can also be used to determine both static and dynamic pressure.

(Part No. Z9024A)

De-Luxe Inspector's Test Kit

This Kit enables you to take the static pressure at the consumer's tap and at the hydrant standpipe. The dual rated flow cup indicator enables you to take the flow at the household tap. A range of plastic tap adaptors enable the gauge to be attached to most domestic taps.

(Part No. TK550)

Digital Boundary Flow & Pressure Test Kit

Digital Boundary Flow and Pressure Test Kit

Designed for ease of use for Inspectors and installation crews within the water utility industry. This kit enables low pressure and flow rates to be identified at the boundary box. Capable of measuring flow from 10 – 120 lpm. 

Can also be used to determine both static and dynamic pressure.

(Part No. Z9024B)

Digital Flow & Pressure Test Kit

Digital Flow & Pressure Test Kit

Designed for ease of use for Inspectors within utility, domestic plumbing and heating industries.

This kit enables you to check and identify low pressure and flow. The Turbine meter has a flow range of 10 – 120 LPM. A range of plastic tap adaptors enables the gauge to be attached to most domestic taps.

(Part No. TK750)

Digital Hose Reel Test/Gauge 10 - 120 LPM

This kit enables the testing of 3/4" and 1" hose reels to B.S. 5306 Part 1 1976. Capable of measuring flow from 10 - 120lpm and when fitted with the optional pressure gauge can be used to measure both static and dynamic pressure.

(Part No. HOSEREELTESTDIGITAL)

Flow and Pressure Test Kit

This kit enables the static pressure to be taken at the consumer's tap along with the flow via a dual rated flow cup.

A range of plastic tap adaptors enable the gauge to be attached to most domestic taps.

(Part No. TK445)

Levels of Service Flow Monitor Kit

Designed for ease of use for Inspectors within utility, domestic plumbing and heating industries.

This kit enables you to check and identify low pressure and flow. Flow range: 20-100 LMP . A range of plastic tap adaptors enables the gauge to be attached to most domestic taps.

(Part No. TK505)

Digital Inspectors Test Kit 30bar

Designed to enable the user to take static pressure at the tap.

A range of plastic tap adaptors enable the gauge to be attached to most domestic taps.

Each Kit Includes:

• Carry case with Inlay
• Digital pressure gauge 0-30bar, fitted to a bleed valve assembly, which is set at a 45⁰ angle for ease of use.
• A selection of tap adaptors

(Part No. TK440/DIGITAL)

Quick-fit Inspector's Test Kit

Designed to enable the user to take static pressure at the tap.

A range of plastic tap adaptors enable the gauge to be attached to most domestic taps.

(Part No. TK440)

Unvented System Test Kit

A must for the professional installer, this kit enables flow and pressure of pressurised heating systems to be taken and hence, protect the appliance from high/low pressure damage.

A range of plastic tap adaptors enables the flow monitor to be fitted to most internal taps.

(Part No. TK503)

Bleed Valve Assembly for VM Test Kits

Bleed Valve Assembly (For Test Kits)

The Bleed Valve Assembly is a replacement part for the Vernon Morris Test Kits

(Part No. Z9004)