Pressure Gauges

Chrome Gauge 3" Dry 140mhd/14Bar (Btm connection)

3" Chrome Pressure Gauge 140mhd/14bar Dry type 1/4" BSP bottom connection

(Part No. 11075)

Traffic Light Gauge 63mm (30mhd)

Traffic Light (Dry) Pressure Gauge

The 63mm (2½”) Traffic Light gauge illustrated is of the direct mount type with ¼” BSP bottom connection.

The gauge has a range of 30mhd with coloured segments depicting the following ranges:

RED Scale 0 – 10mhd

AMBER Scale 10 – 15mhd

GREEN Scale 15 – 30mhd

(Part No. 12431)

Digital Pressure Gauge 63mm 0-40bar

63mm (2.5") Diameter Case.  Accuracy +/- 0.5%.  Bottom Entry Direct Mount.

(Part No. 14009A)

Digital Pressure Gauge -1 to +35bar

63mm Digital Pressure Gauge

Battery powered 0.5% Accuracy

(Part No. 14009G)

Digital Pressure Gauge 63mm (2 1/2") 30Bar range

Digital Pressure Gauge (0 – 30 Bar)

The 63mm (2 ½”) diameter digital pressure gauge provides the following units of measure:

Bar, PSI, MPa, KPa, Kgf/cm²  

Navigate between units by simply pressing the ‘unit’ button until the desired unit of measure is reached.

(Part No. 14009B)

Digital Pressure Gauge

The Keller LEO1 digital pressure gauge offers an accurate and convenient replacement to standard analog pressure gauges

(Part No. 14009)

Digital Chrome Static Assembly

Digital Chrome Static Assembly

The male instantaneous plug is fitted with a 0 – 30 Bar digital pressure gauge and vent cock.

The device is used to take static pressure readings at the hydrant standpipe outlet. It has the facility of a built-in vent cock to allow the user to vent off the pressure within the line once the supply has been isolated.

(Part No. 14009D)

Digital Gun Metal Static Assembly

Digital Gunmetal Static Assembly

The male instantaneous plug is fitted with a 0 – 30 Bar digital pressure gauge and vent cock.

The device is used to take static pressure readings at the hydrant standpipe outlet. It has the facility of a built-in vent cock to allow the user to vent off the pressure within the line once the supply has been isolated.

(Part No. 14009C)

Chrome Static Assembly

Chrome Static Assembly

The male instantaneous plug is fitted with a 80mm (3”) Chrome plated gauge range 0–140 mhd/bar and vent cock.

The device is used to take static pressure readings at the hydrant standpipe outlet. It has the facility of a built-in vent cock to allow the user to vent off the pressure within the line once the supply has been isolated.

(Part No. Z9031)

Gun Metal Static Assembly

Gunmetal Static Assembly

The male instantaneous plug is fitted with a 80mm (3”) gauge range 0–140 mhd/bar and vent cock.

The device is used to take static pressure readings at the hydrant standpipe outlet. It has the facility of a built-in vent cock to allow the user to vent off the pressure within the line once the supply has been isolated.

(Part No. Z9035)

Gun Metal Static Quick-Fit Assembly

The Gun Metal Static Quick-Fit Assembly is designed to be used in conjunction with pressure gauges fitted with a corresponding male probe. This allows the user to take static pressure at the hydrant standpipe outlet.

The assembly is supplied with a quick-fit connector ready to accommodate a pressure gauge fitted with a male probe, allowing interchangeability between gauges quickly and easily.

(Part No. Z9031F)

Static Assembly c/w Ball Valve

Gunmetal Static Assembly c/w Ball Valve

The male instantaneous plug is fitted with a 80mm (3”) gauge and 1/4” BSP ball valve.

The device is used to take static pressure readings at the hydrant standpipe outlet. It has the facility of a built-in ball valve to allow connection to other devices as well as providing a static pressure reading when closed.

The assembly can be supplied with either a Dry or Glycerine filled 80mm (3”) gauge with rubber boot.